Channel and Multibank heaters are designed for the pre and post weld heat treatment of large constructions,fabrications and vessels,where they can be used as a temporary furnace installation or attached directly to the workpiece.They are usually manufactured using nickel chrome (NiCr) wire,but a higher working temperature can be achieved by using a high temperature wire as an alternative,when required.A range of voltages from single bank 60V to four bank 277V heaters are available,and tails can be terminated with steel connector blocks,Dinse type plugs,or camlock connectors.
Standard sizes stocked as below :-
Product No : ART 0202A SINGLE CHANNEL HEATER 3.3Kw
Product No : ART 0202B SINGLE CHANNEL HEATER 4.4Kw
Product No : ART 0205 4 BANK CHANNEL HEATER 13.2Kw
A full range of Channel Heater Spares are available, from Beads to Stainless Steel Trays and Connector Blocks : -
Product No : ASP 1107 - CHANNEL HEATER MAIN BODY BEAD L 19mm OD 30mm
Product No : ASP 1108 - CHANNEL HEATER SPACER BEAD L 4.75mm OD 30mm
Product No : ASP 1109 - CHANNEL HEATER MAIN BODY BEAD LGE L 42mm OD 30mm
Product No : ASP 1110 - CHANNEL HEATER TAIL BEAD WHITE L 30mm OD 13mm
Product No : ASP 1111 - CHANNEL BEAD SPACER BEAD L 10mm OD 30mm
Product No : ASP 1112 - CHANNEL CASTLE BEAD STRAIGHT EDGE
Product No : ASP 1113 - CHANNEL CASTLE BEAD CURVED EDGE
Product No : ASP 1114 - STEPPED BEAD L 25mm OD 25mm To 19mm
Product No : ASP 1115 - TWIN HOLE BEAD
Product No : ASP 1116 - CHANNEL HEATER TAIL BEAD PINK L 30mm OD 13mm
Product No : ASP 1201 A - CHANNEL HEATER TRAY & RETAINING CLIPS 3.3Kw
Product No : ASP 1201 B - CHANNEL HEATER TRAY & RETAINING CLIPS 4.4Kw
Product No : ASP 1202 A - CHANNEL HEATER SPIRAL CORE 80/20 3.3Kw
Product No : ASP 1202 B - CHANNEL HEATER SPIRAL CORE 80/20 4.4Kw
Product No : ASP 1202 C - CHANNEL HEATER SPIRAL CORE H/T 3.3Kw
Product No : ASP 1202 D - CHANNEL HEATER SPIRAL CORE H/T 4.4Kw
Product No : ASP 1203 - STEEL CONNECTOR BLOCK